ASPIRE CYBER G SLIM POD SYSTEM

Packaging & Contents

Aspire’s Cyber G pod system comes in a cardboard box with a card slide-off outer sleeve. On the front of the sleeve has printed Aspire branding with an embossed Cyber G picture in front of a ‘G’ coloured panel. Underneath is the printed ‘Cyber G’ title with the slogan ‘Game Changer’. At the bottom is a large printed Nicotine warning as part of TPD regulations on vaping products. Also stuck on the front is a little label displaying the colour of the device inside. This review has the ‘Hunter Green’ colour.

On the right of the sleeve is 3 printed key features of the Cyber G, while the left side includes the scratch-for-authenticity label and another label including the printed barcode, batch number and manufacturer license number. The bottom of the sleeve includes printed Aspire branding, package contents, warnings and Aspire’s contact info. Again, printed in big at the bottom are the usual TPD nicotine warnings.

The sleeve slides off the box and the contents inside are:

• Cyber G Device.
• Pre-installed 0.8Ω Mesh TG Pod.
• 1.0Ω Mesh TG Pod.
• Type-C Charge Cable.
• User Manual.

Aspire Cyber G Device

The Cyber G device runs on an 850mAh internal battery and measures 122mm in height with a diameter of 19.5mm for the standard version. The TPD version (as reviewed) is slightly shorter at 114mm having a slightly smaller pod on top. It weighs in at just 42g for the standard and 40.5g for the TPD version.

The device is made in PCTG and with Alloy on the battery body, covering over half of the device in the colour purchased. At the top is clear where the pod is inserted and has 2 small holes for airflow, and underneath is a design cut-out window showing the circuitry inside. This also includes 2 LEDs showing the mode selected. Mounted on the front of that panel is the main power/fire button which features an etched ‘a’ for Aspire logo. Below, on the main Alloy battery body is a subtle printed Aspire branding in white. At the very bottom of the Cyber G is a circular panel which houses the main LED and a USB Type-C charge port underneath at the very bottom.

The Cyber G doesn’t have a display or any up-and-down wattage buttons and power is automatically set depending on the pod resistance inserted. There is a very simple mode function where you can select from 3 vaping modes. Press the fire button 3 times to select this where the small middle LED lights will light showing the mode. Then press the fire button to select between Auto draw (the left lights up), Button activated vaping (the right LED lights up) or both the fire button and auto draw function, where both lights are lit. Selecting the Auto Draw left LED will also part act as a button lock when in the pocket.

The main LED at the bottom lights during the vape and also gives an indication of the battery usage. At 60-100% battery the LED will light Green, at 30-60% it will light Blue and at 0-30% it lights Red indicating a charge is needed. The Aspire ASP chipset on the Cyber G also has the usual built-in safety protections which include; vaping over-time protection, Short circuit and overheat protection.

The Cyber G by Aspire comes in a range of 7 colours; Hunter Green as reviewed, Black, Silver, Amber Orange, Brown, Blue and Pink.

Cyber G Pods

The pods for the Cyber G have a sealed-in coil so you cannot replace the coils separately and you’ll need to change the complete pod when a new one is needed. Two pods are supplied in the kit to get you started. There is a 0.8Ω Kanthal Mesh TG pod pre-installed and a 1.0Ω Kathal Mesh TG pod also in the box. These use the same material as Aspire’s popular AF coil series.

The capacity of the pods is 3ml for the standard version and 2ml for the TPD version. They will interchange as it’s only the height that is different, which is maybe something to bear in mind if you are in Europe on a TPD version and want replacements of a bigger capacity next time.

The pods are made with tough PCTG with a sealed mouthpiece and magnets on the bottom of the pod that connects to the Cyber G device pod insert. At the side of the pod is a pull-out rubber bung to fill the pod with e-liquid.